SOHC.co.uk Forums > Project Board
Tels CB550 project
Bryanj:
Probably me Ted, building from my box of bits to a budget mate
TezzerTel:
--- Quote from: Bryanj on December 12, 2024, 08:35:41 PM ---The rubbers are identical, the steel brackets are handed and you put the steel tube in the opposite hole in the rubber(but same physical positio front to back) for the screw to clamp on.
I have seen in the past the same clamp used both sides and the stem on one side fitted backwards, one of those things you stand looking at, know there is something wrong but cant figure what till the light bulb goes on
--- End quote ---
My steel brackets are handed so as I see it I can't put the stem in the opposite hole because the nuts that are welded to the brackets are either both forwards or both rearwards?
Bryanj:
Correct with original but you can fit the bracket the other way round so one screw is at front the other at rear and trawling the 4 into 1 web site i saw pattern brackets and rubbers available
TezzerTel:
If I fit 1 bracket the other way around then the nut will be on the outside?
Bryanj:
No, still the nut on inside the bolt moves from front to back or vice versa
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version