SOHC.co.uk Forums > Project Board

Honda CB400NA Superdream - new money puddle.

<< < (21/60) > >>

McCabe-Thiele (Ted):
TBH Dave that never occurred to me, that's probably something I should have done before I took it to bits as it was a runner & theoretically a rider. There is no obvious damage to the frame etc.
The wheels rotate true with no sign of any buckles.
I'll ask my mate Neil who has the mental Turbo bike as he is in the bike trade.

Something that I do not like about the Superdream design is the top yoke being a flat bit of steel albeit with a lip, not a big block of alloy.
The bar holder just bolts on the steel plate from underneath with no top pinch bolts at the top, just top cap nuts.

andy120t:
Dave - is £100  to check and straighten it as well?  Was that a spot on Watford?

McCabe-Thiele (Ted):
I have no understanding of how the frame is re- aligned if it's found to be bent. I understand 4 wheel alignment on a 4x4 as there are adjustable suspension arms on all four wheels. I've seen a body jig for when a chassis leg is replaced, that tends to be where a tacked in part is checked before and after full welding.

I wonder if it's on U-tube how they do it.

K2-K6:
They literally bend it, ordinarily with hydraulic assistance, to "twist" it back into alignment if its distorted.

Look for "motoliner" jig, should bring up something.

Bryanj:
Brute force and hydraulics is the answer Ted, you bend it back, usually pluss a little bit to account for spring in the metal

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version