SOHC.co.uk Forums > Project Board

Honda CB400NA Superdream - new money puddle.

<< < (45/60) > >>

McCabe-Thiele (Ted):
When I dismantled the center stand I found that the centre pivot shaft was broken quite close to the brake pedal bracket that bolts into the end of the shaft. Clearly this damage had been present for a long time leading to wear in the frame at the left side as the shaft was pretty free to wobble about.

The original stand shaft looks as thought the end part is pressed into the shaft as it was serated at the end, this has kept it in place for many years.
When the brake was applied the whole bracket was moving as the end bolt was finger tight, this might explain why the wear is mainly on the left side  of the brake lever, the outer end has relatively little play.

Reversing the insert does not significantly change the amount of play, the brake pedal though has some serious wear to the inner left side. There is not a lot of material to cut into to make it good with an oversize bush/insert.

I'm going to start fitting the steering shaft whilst I mull over my options, I'm still working on the footrest hangar plates, I have a couple of spare sets that came with the bike to practice on. I'm thinkng a Matt finish might be more practical, still needs the preparation work.
#
#
#
PXL_20250209_122409225 by Macabe Thiele, on Flickr

Oddjob:
You don't look very hard Ted.

https://tnortheast.co.uk/product/honda-rear-brake-pedal-3/  That's in the UK.

https://www.ebay.co.uk/itm/405524299941?_trkparms=amclksrc%3DITM%26aid%3D1110018%26algo%3DHOMESPLICE.COMPLISTINGS%26ao%3D1%26asc%3D280787%26meid%3D3cdc28310ca94d7ca76c6d4fbedbdce6%26pid%3D101196%26rk%3D2%26rkt%3D12%26sd%3D156593564115%26itm%3D405524299941%26pmt%3D1%26noa%3D0%26pg%3D2332490%26algv%3DCompVIDesktopATF2V6WitheBertDiversityReRank%26brand%3DUnbranded%252FGeneric&_trksid=p2332490.c101196.m2219&itmprp=cksum%3A4055242999413cdc28310ca94d7ca76c6d4fbedbdce6%7Cenc%3AAQAJAAABIHq5%252FnIFMUEf6B1DI668RyGdRfI6covxK3pfZkGKdoYSD8Fc9U2pW3qa7utGenAYTjdfByflhHAGpP35vZGf%252F95UitaOvYeQnDZS57Zl9zzC7M7gAlkxEwZJqRDpbWgYFTOyaP81iEPAom%252BVDBczgYNOp0vgTWi6XLNAH%252FE2eUowuOmJCGXurBMUUkgnSPDHxdb%252FeHFXITxuzBYJUgG3HcPwBjPvELmqUjCo00c0Z0CWuzXF%252Fect%252BKmfC8iQno5w07p1Z0nLGaNlYHzqJNFoEmkTmlXOVFdBACO7sut0gm8DN%252FJ4PeJEcJfB%252B%252BYVvaS7%252BXmRYjtb57Utx1DltYdQt79NvZSPsAcouHzO2Gs80Dtnb3osTEITxRenTjTJo%252FhEeQ%253D%253D%7Campid%3APL_CLK%7Cclp%3A2332490&itmmeta=01JKNHAYKKJXZZYM2CE9N9ZYJP Used but cheap and looks to have the bush.

https://www.ebay.com/itm/363923129274  That's in the USA.

https://produto.mercadolivre.com.br/MLB-2618430049-bucha-pedal-freio-cb400450-original-honda-46501-413-000-_JM South America I think.

McCabe-Thiele (Ted):
You are a star Ken, I must have a poor search engine!

At first I thought I had made a Typo claiming to be related to one of the Kray Twins, I'm a Pussycat really not hard at all.lol

McCabe-Thiele (Ted):
I've had a good couple of hours on the SD this afternoon, the headstock taper roller kit I bought fitted a treat, just did away with the thick base spacer, I fitted a thinner one I had in my box of bits.

Trouble is when something goes well I'm looking for a knock on problem.

Johnny4428:

--- Quote from: McCabe-Thiele (Ted) on February 09, 2025, 08:29:46 PM ---I've had a good couple of hours on the SD this afternoon, the headstock taper roller kit I bought fitted a treat, just did away with the thick base spacer, I fitted a thinner one I had in my box of bits.

Trouble is when something goes well I'm looking for a knock on problem.

--- End quote ---

🤭 yes I’ve had that feeling Ted when things are going well, your looking over you shoulder so to speak! 😂 in my case it’s not being pessimistic it’s being realistic! 🤭

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version