SOHC.co.uk Forums > Project Board
Honda CB400NA Superdream - new money puddle.
Johnny4428:
Was it getting near stopping time Bryan? 😜
McCabe-Thiele (Ted):
The Haynes Manual mentions having the left side cover removed in the engine out instructions?
I was hoping I could leave the oil in.
K2-K6:
My recall similar to Bryan, head rotated backwards into the space where carbs are usually, to then come out more or less vertically through frame aperture.
McCabe-Thiele (Ted):
So would it help to remove the back wheel from the frame so the frame can be jacked up from the rear swing arm?
McCabe-Thiele (Ted):
At first I thought this Bilt-Hambler degreasing fluid was pretty average, however it appears to work better diluited than neat so I've now updated my opion on the stuff.
I still like Petrol though, posted this picture of my brake pedal that I thought was black from new. A PO painted the outside part but 40 years of grime revealed it was chromed. I've not started cleaning it with Kens's (Oddjob Ken) buffing wheels yet but it looks like it will clean up OK, there is always the Chrome Paint alternative recently posted here.
Nice touch - the braked pivot has a removable insert so that is currently having the Evaporust treatment.
.before by Macabe Thiele, on Flickr
.after by Macabe Thiele, on Flickr
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version