SOHC.co.uk Forums > Project Board

Honda CB400NA Superdream - new money puddle.

<< < (18/60) > >>

Johnny4428:
It’s a messy job but somebody has to do it!🤭 I’ve not tried the Bilt-Hambler stuff yet Ted, mine is about 2 parts diesel and one part petrol ish. It’s sort of satisfying but quite tedious, and messy!😜

McCabe-Thiele (Ted):
I've spent more time removing some of the thick grease / grime on the chain side of the frame.  It was so thick I could not see the rear engine mount bolt heads.

I've now undone all the engine mounting nuts on the frame, four at the front & two at the rear., top triangle removed previously.  Side stand now off.  I'm spending more time cleaning up mess than actual work on the frame.

I've spent about 3 hours in the garage so that's me done in for today. Once I have worked out the engine lifting arrangement to take the weight off the engine mounting bolts I'll be ringing my brother for the final phase - engine out, turn the bike round on the ramp in readiness for front wheel & fork removal.

Johnny4428:
Nice work! If it’s any consolation I’ve been hacking down bushes the day. It’s not much fun either.

McCabe-Thiele (Ted):
Machete in hand, secateurs at the ready & lopping  bushes - hard graft indeed Johnny - definetely harder work than what I've been doing today. 8) 8) 8)

McCabe-Thiele (Ted):
My brother came today to help me get the engine out for the last haul. My it's an unweildy lump, I took off the left side cover on advice from Superdream site. We tipped the head towards the rear wheel for the last part of the process, the rear frame was quite tight on the engine, suddenly the frame let go then it was out without mishap. Walked the engine sidways onto the waiting dolly platform with some wooden offcuts as support to stop it tipping over.

Made me wonder what the steel plate  with three bolts is for on the engine above the cylinder head area?

I'm thinking come assemble time to put the engine on the ramp then just lower the frame onto the engine, bolt in place then  fit the rear wheel, jack up the rear swing arm,   final stage  fit the front forks etc.




.
.PXL_20241109_153855245 by Macabe Thiele, on Flickr

.PXL_20241109_153906250 by Macabe Thiele, on Flickr

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version