Other Stuff > Misc / Open

Not really a bodge more a half done fix?

<< < (4/4)

McCabe-Thiele (Ted):

--- Quote from: Bryanj on October 31, 2024, 02:50:26 PM ---I would have fitted a 27deg angled banjo there, or maybe a straight fitting with 90deg swivel end on the hose

--- End quote ---

The SS 13 mm  pipe clip is one I've had for a few years that was too big for the job I bought it for.
I ended up using a similar pair of 10mm ones - can't remember what the jb was now.

I'll google a 27 deg banjo and see what one looks like, is it an angled fitting for the pipe itself?

andy120t:
Looks a lot better!

Nb You seem to be missing the rubber covers that stop muck getting into the fork slider seal.

Bryanj:
Ted go to fleabay and type in an3 brake pipe fittings to see a lot of the types you can get mate

McCabe-Thiele (Ted):

--- Quote from: andy120t on October 31, 2024, 05:02:01 PM ---Looks a lot better!

Nb You seem to be missing the rubber covers that stop muck getting into the fork slider seal.

--- End quote ---

It had split gaiters fitted to hide some pitting, I've cut them off. No fork stanchion drain holes fitted to my model. It will get a fork rebuild, am hoping it does not need Hard Chroming.

Navigation

[0] Message Index

[*] Previous page