SOHC.co.uk Forums > Project Board

Reworking Honda wiring loom

(1/2) > >>

Ken4004:
Just a little information for anyone thinking of rewiring or repairing their bike wiring loom.
I have bought the tools and crimps on the internet , had a little trouble finding a 5 into one crimp for some of the earthing but found a company called Kojaycat Automotive and marine in Scotland please see pics attached.
I have also bought the correct crimp tools and all the other bullet crimps and connectors and have nearly finished all the rewiring so hopefully no issues with bad corroded connections.

Nurse Julie:
Kojaycat are a well know supplier as is Vehicle Wiring Products. Big Al on the forum also makes complete new looms which are excellent and Electrex World supply very good looms.

McCabe-Thiele (Ted):
If you decide not to replace your loom Kojaycat sell the various plastic block connectors to you can release the existing male or female terminals by pressing down on the tang end, clean them up then re-fit into new unbroken or yellowed blocks.
I sent a photo via their enquiry email to make sure I bought the right block connectors.

On my 400 I bought a new loom from Elextrex World, the colours were correct.
On my 500 I just fitted new block connectors, made up small looms like for the tail lights myself.

BigAl (Alan):
Last time I looked Auto-star only sold the correct classic Honda 8-way latched connectors. However. Kojaycat do sell the the 2.3.4.6.9 correct latched connectors for classic Honda motorcycles.

Bryanj:
If i want the blocks i go to Big Al, he has got the exact ones and more importantly a forum member

Navigation

[0] Message Index

[#] Next page