SOHC.co.uk Forums > Project Board

Honda 400 4 head light birds nest

(1/2) > >>

Ken4004:
Hi everyone just finishing off the wiring and have been changing all the connectors on the wiring loom, I just wondered if anyone has a good method of tidying up the wiring in the headlight shell.

I can’t believe it’s all just pushed in there must Be a preferred method of dressing the cables to allow the headlight to be fitted easily , looking forward to your thought on the subject.

Johnwebley:
Wait till spring, hopefully a local black bird will do it for you

You will have to wait until the birds have flown the nest


Sent from my SM-A546E using Tapatalk

Bryanj:
Practice your origami

Athame57:

--- Quote from: Johnwebley on November 11, 2024, 06:37:07 PM ---Wait till spring, hopefully a local black bird will do it for you

--- End quote ---
Nah....much more a Robin's kind of territory!  ;D

McCabe-Thiele (Ted):
I just did the best I could with the wiring spreading it out radially using some tape to hold it in place, now that I have fitted a 500 standard rim with a Land Rover LED headlamp there is lots of room as the LED units are relatively slim. Not for the purists as I fiitted fork clamps as the 500 bowl is deeper, bonus is it's much brighter than the standard Candle  like lamp. I retained the original 400 bracket for added sturdyness.

400 lamp change 2 by Macabe Thiele, on Flickr

.400 lamp change by Macabe Thiele, on Flickr

Navigation

[0] Message Index

[#] Next page