SOHC.co.uk Forums > Project Board
TL125S
Rozabikes Tim:
--- Quote from: Bryanj on December 18, 2024, 10:39:12 AM ---Looking at the parts list it looks to me like the coils are in the outer cover and the rotor is a permag hollow one, if so any "legged" puller will probably damage it.
It may be an 18mm or 16 mm thread but use a HT bolt as it will need to be done up really tight.
The 4 legged Honda puller is a cross with a different thread on each leg, i have one but you are a bit far away.
--- End quote ---
Here ya go £16. Would say I would have it off you when done but I have the 4 legged one already.
Also they do a clutch nut too if you don't have one suitable.
AndyD:
Dave,
Probably too late but attached is the section on the puller tool from the Honda Common Tool Manual.
I scanned the full manual for Ash quite some time ago so may be in the archive as well.
Hope you've got it sorted or if not that this may help.
Cheers,
Andy [ Guests cannot view attachments ]
AndyD:
[ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]
Here are the pages in image form - linked to pdf in last post so probably doesn't work (must get a grip of all this IT stuff one day!).
Cheers,
Andy
Laverda Dave:
Thanks for all the advice on the puller. I'll try a 14x1.25 pitch bolt high tensile bolt first and if that doesn't work I'll get a proper puller. The £16 price looks to be a bargain until the VAT & Post is added knocking it up to £26! If it were my bike I'd buy the tool but chances are it will be used once only, the owner of the bike is extremely unlikely to ever use it hence the bolt first option.
The engine is now out of the frame and on the bench ready for a full strip after crimbo (or between crimbo and new year depending on the mince pie and quality street situation 😋).
McCabe-Thiele (Ted):
That looks an interesting challenge Dave, I look forward to seeing your progress 👍👍👍
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version