Other Stuff > Misc / Open

Chassis plate - hammer in drive screw rivett size?

(1/3) > >>

McCabe-Thiele (Ted):
A member kindly sent me a few of the rivett things for re-attaching the chassis plate.
All used up now, anyone know what size they are & where I can get a few more from?

Bryanj:
I will try and remember Ted

Bryanj:
Firm and pic should be attached BUT dont know the size you want Ted

McCabe-Thiele (Ted):
My 400 & 500 were the same size so figured  the SD will be the same.

I think they are smaller than 3/16".

Bryanj:
Probabl are Ted, i didnt have time to look closely at the site, thats where mine came from and i had to order twice to get the correct size.
3/16 is the length the diameter is 00 or 2, which are number sizes one is 60 thou the other 80 thou ish or 1.5mm or 2 mm.
If you search on Accu web site for different sizes

Navigation

[0] Message Index

[#] Next page