SOHC.co.uk Forums > CB750

brearing shells

<< < (2/2)

archmill:
How do I add to Aladins Cave ?
I have two articles, one on how to use Plastigage and one how to select shells

taysidedragon:

--- Quote from: archmill on December 24, 2024, 10:46:14 PM ---How do I add to Aladins Cave ?
I have two articles, one on how to use Plastigage and one how to select shells

--- End quote ---

I think SteveD has to do it?

roverboy:
hi all thanks for all your replies much appreciated not sure how i reply to each of you individually not good on computers  regards john

roverboy:

--- Quote from: Nurse Julie on December 24, 2024, 01:55:34 PM ---Hi John.
Using all green shells in theory sounds great but that will only work if there is no wear on the crank shaft. You need to measure the current clearance with Plastiguage to see if they are all within spec still. Yes, you can use the existing crank bolts and Hondabond or similar is fine for the crank case halves and should be used very, very sparingly.
Out of interest, why do you think you need to change all the shells? Are they really pitted or scored?

--- End quote ---

Navigation

[0] Message Index

[*] Previous page