SOHC.co.uk Forums > CB500/550

float valves

(1/2) > >>

Morala:
Hi everyone back again for more advice, i have a 1974 cb550 with a Keihin 022A carb set on it when i was working on the carbs i damaged a float bowl valve the small plunger got stuck in the valve body, my silly mistake, the valves are the metal pointed ones not the rubber ones any idea where i can order the same or would the rubber pointed ones do the job, if so would i be better replacing all the valves  with the rubber pointed ones or can i mix and match thanks for any advice you can give me cheers.

Johnwebley:
David Silver

NRP Carbs

You may have to buy a carb kit

Try Mr Google for those two

Sent from my SM-A546E using Tapatalk

Sesman:
Yes, you can mix and match if necessary. Like he said, NRP, DS and Allen’s Carburettor.

And https://www.cb-four.com/cgi-bin/shop/__CB-550-K+F/Seats---Parts/_04.12.html

Morala:
cheers guys will check them out

Skoti:
Better to change all 4, then your float levels have a good chance of being similar.

I'm not keen on after market carb brass ware and managed to source NOS genuine Honda for mine.

Good luck

Skoti.

Navigation

[0] Message Index

[#] Next page