General > Out & About

OUT AND ABOUT 2025

<< < (32/69) > >>

Laverda Dave:
It's always difficult to build a Triton with a unit engine. There's a lot of 'open space' to deal with around it hence why the purists go for a pre unit motor, a bit more spaced out.
Dave Degans got the right combination with the unit motor in the Dresda. The front engine plates pushed the motor back a little to fill the gaps. The shape of the oil tank is also critical, again to fill the gaps. Same with the fuel tank, I deliberately used a short circuit tank on mine that sits on top of the frame rails with little overhang at the sides. Fitting a big Manx style tank accentuates the unit engine making it look a bit lost in a wideline frame.
But....as Andy rightfully states, it's how the builder wanted to build it and building a good looking and functional Triton isn't easy so hats off to anyone who attempts to build one👍

Laverda Dave:
I don't particularly like the disc brake though on it, just doesn't suit it although I can understand why it is fitted, he wants to stop!
I've seen a couple of Tritons that have used the Honda CBX550 inboard disc brakes fitted to spiked rims and suitably machined, they both looked fantastic, like a drum but actually stops.
I looked into doing the same but anyone with a CBX550 front brake knows exactly what they are worth and used for these days.

Bryanj:
And whats more a rear pia to work on!

K2-K6:

--- Quote from: Laverda Dave on May 16, 2025, 07:38:00 PM ---I don't particularly like the disc brake though on it, just doesn't suit it although I can understand why it is fitted, he wants to stop!
I've seen a couple of Tritons that have used the Honda CBX550 inboard disc brakes fitted to spiked rims and suitably machined, they both looked fantastic, like a drum but actually stops.
I looked into doing the same but anyone with a CBX550 front brake knows exactly what they are worth and used for these days.

--- End quote ---

There's other concept too https://www.quattroworld.com/audi-news/audis-world-ufo-brakes-worked-also-kinda-didnt/ shows an interesting design.

It wouldn't be that difficult to get something like a drum looking hub with spoke facility to house one of these, then a Buell internal type caliper arrangement  modded to use.

Rozabikes Tim:

--- Quote from: Laverda Dave on May 16, 2025, 07:33:12 PM ---It's always difficult to build a Triton with a unit engine. There's a lot of 'open space' to deal with around it hence why the purists go for a pre unit motor, a bit more spaced out.
Dave Degans got the right combination with the unit motor in the Dresda. The front engine plates pushed the motor back a little to fill the gaps. The shape of the oil tank is also critical, again to fill the gaps. Same with the fuel tank, I deliberately used a short circuit tank on mine that sits on top of the frame rails with little overhang at the sides. Fitting a big Manx style tank accentuates the unit engine making it look a bit lost in a wideline frame.
But....as Andy rightfully states, it's how the builder wanted to build it and building a good looking and functional Triton isn't easy so hats off to anyone who attempts to build one👍

--- End quote ---

Come on Dave show us yours!!

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version