SOHC.co.uk Forums > CB350/400

Condenser replacement

<< < (2/5) > >>

Skoti:
Expect regular adjustments and timing checks unless you got the genuine Honda points.
Some of the aftermarket ones have soft heels and contacts not properly hardened.

I ended up re-fitting the original ones after binning the aftermarket junk.

Good luck

Skoti

Bryanj:
It has been reported on the us site that a lot of aftermarket condensors fail quickly and if you want genuine Honda points plus condensors it is cheaper to buy the complete plate assembly BUT  sit down before you check price

Oddjob:
I got some condensers from Andy Cepok in Austria, he listed them as genuine Honda but were not in genuine Honda blister packs, they look ok though. Not had a chance to test them yet and I still have a couple of genuine condensers so which ones I'll use is open to debate. I still have loads of old condensers from old points plates, I may test those to see if they are still working. As it turns out I don't need to fit condensers with the Hondaman system on my engine, we'll see.

ST1100:

--- Quote from: Oddjob on February 10, 2025, 10:13:16 PM ---I got some condensers from Andy Cepok in Austria, he listed them as genuine Honda but were not in genuine Honda blister packs, they look ok though. Not had a chance to test them yet and I still have a couple of genuine condensers so which ones I'll use is open to debate. I still have loads of old condensers from old points plates, I may test those to see if they are still working. As it turns out I don't need to fit condensers with the Hondaman system on my engine, we'll see.
--- End quote ---
Actually is he located in Germany (D-67551 Worms-Heppenheim)  ;)
But I too purchase a lot of stuff at his eBay store and so far he sells decent quality, mostly OEM...

Nurse Julie:
I have stock of new original OEM TEC condensers.

Navigation

[0] Message Index

[#] Next page

[*] Previous page