SOHC.co.uk Forums > CB350/400

Gearchange rod

<< < (2/2)

McCabe-Thiele (Ted):
I have measured my old link rod with a set of calipers, I'm pretty sure it was the original one.

Total rod length is 61 mm, the shaft diameter is 7.8 mm.
Left hand M6 thread at the gearbox end - the threaded section is 15.0 mm long.
Right hand thread M6 pitch 1.0 at the shift pedal end - the threaded section is 15.0 mm long.
The main center unthreaded section is 26.0 mm with a taper at each end down to the thread that is about 2.5 mm at each end.

26+15+2.5+15+2.5=61

.PXL_20250305_220619739 by Macabe Thiele, on Flickr

XS850:
That’s brilliant Ted - many thanks, exactly what I need!

Cheers - Bruce

Navigation

[0] Message Index

[*] Previous page