SOHC.co.uk Forums > CB350/400
Something I can't find
Athame57:
--- Quote from: Skoti on March 12, 2025, 07:34:03 PM ---
It won't screw into the bracket if it's the wrong thread.
Better to remove the bolt and measure it with a thread gauge first and establish which thread it actually is.
Good luck
--- End quote ---
I see. Thanks for this, 8)
Oddjob:
Part number 16163-551-004, replaced mine with stainless 40 years ago, don't forget the nut as well
They are the standard 0.7mm pitch. Think I went with 4 x 16mm cheesehead screws from https://www.stainlessmiddleton.co.uk/34296-cheese-slotted-machine-screws
Athame57:
--- Quote from: Oddjob on March 12, 2025, 09:42:47 PM ---Part number 16163-551-004, replaced mine with stainless 40 years ago, don't forget the nut as well
They are the standard 0.7mm pitch. Think I went with 4 x 16mm cheesehead screws from https://www.stainlessmiddleton.co.uk/34296-cheese-slotted-machine-screws
--- End quote ---
Thanks, ordered from DSS!
Athame57:
I've tracked these down on Ebay. Pleeeeease tell me I've got this one right! ;D
Skoti:
--- Quote from: Athame57 on March 13, 2025, 10:59:13 AM ---I've tracked these down on Ebay. Pleeeeease tell me I've got this one right! ;D
--- End quote ---
According to Ken's post above you need 0.7 thread pitch.
The ebay one is 0.5 thread pitch so won't fit.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version