SOHC.co.uk Forums > CB350/400

Something I can't find

<< < (6/6)

Oddjob:
With Middletons you must remember that most threads on a Honda are what's called metric fine, M8 use 1.25, M6 use 1.00, M5 use 0.8, M10 is were the problems start, most M10 bolts these days are 1.5 pitch but Honda uses 1.25 pitch bolts, like the lower pinch bolts in the bottom yoke. Same for the lower engine bolts and quite a few others. Don't forget to match the nuts with the bolts if buying metric fine as Middeltons call them. M6 and M8 are easy to find, just be sure to check the pitch as there are some M6 bolts using 0.9 for some reason.

Navigation

[0] Message Index

[*] Previous page