SOHC.co.uk Forums > CB750

Electrical lighting issue

(1/2) > >>

Alexandlinda:
Im hoping that there are some brighter sparks than me on here (pun intended)!
Bike is a CB750 K6 UK model.
I've just fitted a new RH handlebar switch assembly. (All 7 wires fitted correctly I think!) With the key at the first position (ignition) all the warning lights are active.  The headlight switch (H position) activates main headlight with high and low beam working but no tail light and no pilot/parking light. Brake light works. All LH switch funtions work.
 In 'P' position on the RH bar switch I get no pilot light. When I move the key to the final position I get the pilot light and the tail light.

Any thoughts on what I have missed? Any advice appeciated!

Bryanj:
A brown and white or brown wire is not connected to the correct loom wire OR if yours has 3 fuses the tail light fuse or connectors are fubar

Nurse Julie:
Just going to check our UK K6, I'll get back to you.

Nurse Julie:
In 3rd position on the key, you should get tail light, pilot light and when you go to H, those 2 should still be lit up with the low and high beam. You've got a wire not connected somewhere by the sounds of it.

Alexandlinda:
Thanks! I was guessing a disconnected wire - just cant find it! In  the headlamp shell somewhere?

Navigation

[0] Message Index

[#] Next page