SOHC.co.uk Forums > CB500/550

New clutch

(1/1)

florence:
Hello all,

I am about to put new oil and filter in my bike and thought it might be a good idea to look at my clutch at the same time.

Can anyone recommend where to buy clutch plates, springs and gasket.  I was thinking EBC might be a good choice but keen to seek opinions here before I part with hard cash.  I've been meaning to do this job for ages as my clutch slips and I want to get it right first time.

Many thanks,
Steve

Bryanj:
Steve, my first 500 always slipped from standing start, well it did when i tried hard! Never wore out though.
One thing i would say is do not fit hd springs the clutch is heavy enough as it is plus probably change the steels as welk if you are going that far

Bryanj:
Dont know it these are decent prices but from motorcycle products, i have used them nothing to do with me!

florence:
Thank you Bryan

Annoyingly, mine slips when I change down to overtake things and accelerate hard.  It seems worse lately so going to try this.  I have tried adjustments and cables etc. so this is the next step.

florence:
thank you, ordered.

Navigation

[0] Message Index