SOHC.co.uk Forums > CB750

Front Spindle assembly on a 750 K6

(1/2) > >>

Alexandlinda:
A liitle knowledge needed please. I noticed a little movement in the front wheel and found sideways play on the spindle of about 5mm. I seem to have everything in place but wonder if the spacer is just too small. Any advice would be appreciated.

Bryanj:
You have the nut on the wrong way round, hexagon goes against spacer.
You aint the first and wont be the last

JamesH:
For reference, if you’re ever unsure or want to sanity check yourself on assembly sequence, CMSNL is a good resource for exploded diagrams. I’ve restored many Hondas, Kawasakis, Suzukis over the years and still refer back to these from time to time.

JamesH:
Link here : https://www.cmsnl.com/honda-cb750k6-four-usa_model14380/partslist/F09.html


Sent from my iPhone using Tapatalk Pro

Bryanj:
James, have you noticed cmsnl have dropped the fits other models link?

Navigation

[0] Message Index

[#] Next page