SOHC.co.uk Forums > CB350/400

400/4 OEM horn

(1/2) > >>

exvalvesetdabbler:
Trying to find out what the original finish on the horn bracket  and  nut that holds the horn to the bracket was, zinc plate or black enamel ?  The big slotted screw with the fine thread has zinc plate on it but I'm not seeing traces elsewhere.

I currently have a zinc plate bath on the go and getting the urge to plate anything that's a bit crusty.

Best Regards
Dave.

Laverda Dave:
I'll have a look at mine later and let you know.

Toko_Jo:
Black chassis paint.

Laverda Dave:
Toko is correct.
Looking at my original bracket it is painted black the same as the frame (original ones also have a a part code painted in white on the bracket itself, code is 12V  H with the letters 3A105db below it and 1 6 Q below that).
The horn itself is BZP with the large mounting nut and fine thread screw being yellow passivated (as are the two wiring spade connectors on the horn).

SteveD CB500K0:
(Confidently deciphers Honda’s cunning part code)

12 Volt Horn 3 Amp 105 Decibels.


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page