SOHC.co.uk Forums > Other Bikes

Honda CB250N parts

(1/3) > >>

royhall:
I have a friend who just dropped off a 1980 CB250N that needs repairs. Just wondering if any of you wonderful people have any stashes of parts available for that model. Am firstly looking for a good set of barrels and a left hand exhaust header pipe. It's allowed as its an SOHC Honda. Cheers.

Bryanj:
Can the barrells not be bored Roy, i am sure i seen piston kits on cruzin

royhall:
That's not the problem Bryan. It started with a base gasket oil leak at the front. Bodgers fix was to fill the area with plumbers silicone. On stripping, the barrels have been welded at some point and the they have distorted with the heat. The gasket face is not flat. Also has an incredible bodge to the front lower made up of wire wool mixed with JB Weld to block something up. Cant see what it is as I cant get it out. Thought I had seen most bodges but that one is new on me. Easier to just find another decent set of barrels and swap my good liners into that.

Bryanj:
If you swap liners you may still have to bore as they dont always go in the same mate

royhall:
Yes I am expecting something. Will see how it works out.

Navigation

[0] Message Index

[#] Next page