Other Stuff > Misc / Open

T Cut

<< < (2/2)

Seabeowner:
I had good results with T cut cutting back paint before lacquering. You could see the paint removed on the rags. May not work so well over hard lacquer.

Johnny4428:
Worked well the last time same make of lacquer. But I had an old bottle of T cut that I had for years but had to buy a new bottle recently, new stuff is shite.


Sent from my iPhone using Tapatalk

neat street:
cannot quote on `T Cut` but some paints are designed to be harder to avoid the light scratches that we do not want from every day use, and of course any cutting compound will have to work harder to compensate... just remember that there are different grades of compound from a coarse to ultra fine dependant on the job at hand, and as Athame57 advises, if it is too coarse you will soon go through the paint/laquare and have to do a repaint, and the gloss finish will depend on the grade used just like sand paper, the coarser grits will not give that deep shine, but will take away marks quicker :-)

ka-ja:
I think a lot of "old" chemicals for home use have been altered due to health and safety concerns over the past few years, coupled with production costs, it leads to less effective products, creosote is a good example, hard to get the real stuff now.

Athame57:
Has everyone looked at their product range properly? You get a choice of colour matches now. Here is my tube of the universal RED version:

Navigation

[0] Message Index

[*] Previous page