SOHC.co.uk Forums > CB500/550

Original finish on fork sliders

(1/2) > >>

Murf:
Just wonder if any one can tell me what the original finish on the fork sliders was like on a 1975 US spec 550, at the moment they are what looks like a very thin silver paint over brushed alloy, which I actually like the look of, well the better parts anyway. They are a bit patchy and worn so do need refinishing.  I would like to achieve something like the original finish if possible.

Sesman:
Satin polish and lacquer (clear coat).

Murf:
Thanks,
yes that would figure by the look of mine. Do you have any idea if gloss or satin clear coat was used.

Sesman:
Sorry, I don’t know for certain, but I would predict ‘clear’. This prediction is based simply on my own experience in attempting to replicate the original fork finish, which seems to me at least very authentic looking.

Murf:
Thanks,
I will have a go at removing what’s on them now with paint stripper and do my best not to damage the original brushed finish of the aluminium.  Although that might be difficult as I know some of the old Honda clear lacquer can be resistant to a lot of chemicals. 

Navigation

[0] Message Index

[#] Next page