SOHC.co.uk Forums > CB500/550

My CB550 Four k1 journey

<< < (3/6) > >>

McCabe-Thiele (Ted):
I bought some on ebay, I think it was a selection box of different diametrs.

Seabeowner:

--- Quote from: Bryanj on August 24, 2025, 05:33:27 PM ---From dss uk site, everything will transfer but new cables and top brake hose would be better.

--- End quote ---
If you want throgh the bars wiring check with DSS that they have the holes. I used the ones they listed for the 550F which did have holes but now seem OOS. These are for a 750 so not sure if ok, but do have the holes:
https://www.motorcycleproducts.co.uk/chrome-78-handlebars-25-rise-holes-for-wiring-honda-cb750k/1/015257

Jond99:
Cxxx

taysidedragon:
They could be unused connections that are only used in certain countries. One common wiring loom makes commercial sense and several sohc models from that time have them.

McCabe-Thiele (Ted):
Do all the electrics work as they should?
Is the brown a permanent live or only when the ignition is on?
Possibly for other markets as has been said,

I know sometimes the Horn is earthed at the frame fitting, sometimes depressing the horn button earths it at the switch.

Navigation

[0] Message Index

[#] Next page

[*] Previous page