Mixture screw spring CB550K3

[Harold 400/4]

Does anyone have a spare mixture screw spring I could buy pls?
Carbs are PD46A and I’m currently overhauling. Took the 4 mixture screws out, and one of the springs is in two pieces. All the other parts seem OK other than the O rings which I’ll renew.
Many thanks
Harold

[JamesH]

Harold - I was just about to list these on eBay as a spares set for £60. Probably more than you want to spend, but might be a good option as a spares resource - you could re-plate/replace all of the hardware over time and swap in/out on your set. Happy to do them for £50 to a forum member. The bodies are probably too corroded to be salvegable.









Sent from my iPhone using Tapatalk Pro

[Harold 400/4]

Hi James. Many thanks for the offer, but as it’s just the one spring I need, I will decline.
Good luck with the sale.

[Johnny4428]

Hi Harold, I have one, just pm your address and I’ll pop it in the post.

[Harold 400/4]

Thanks Johnny. PM sent 👍