SOHC.co.uk Forums > CB500/550
550f running rich?
K2-K6:
John may have this covered, but his recent experience of running with cam one tooth out needs working through to eliminate from enquiries.
DomP:
I have tried to find unmolested springs but haven't got any as yet. Ive tried air screws out as for as 2 ½ but it gets unrideable
McCabe-Thiele (Ted):
There is a simple test to check if the valve timing is a tooth out.
No cam cover removal just something to do with what the valves are doing at tdc?
IIRC Bryan or Ken posted it ages ago.
I've forgotten what you do, it might be in my 500 rebuild blog.
neat street:
--- Quote ---Airbox is standard but I have used a Honda 500 air filter as I am missing all the breather hose parts, as a result ive blanked the breather hose port off.
--- End quote ---
dont think the breather port should be blocked off... any thoughts?? this may cause some issues???
Bryanj:
The port on the airbox can be blanked off but not the hose from top of enginge
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version