SOHC.co.uk Forums > CB750

Powder coating

<< < (2/2)

Spitfire:
Just found the details for the powder coating, this was back in 2006.
The frame plus 26 other parts cost me £298.
This was the list.
Component   
1   Frame   
2   Swinging arm   
3   Rear brake torque arm.   
4   Oil tank   
5   Top Yoke (Alloy)   
6   Bottom Yoke   
7   Speedo/Rev counter bracket   
8   Front indicator brackets left   
9   Front indicator brackets right   
10   Engine mount front (triangular)   
11   Engine mount rear   
12   Stoplight bracket (small L shape)   
13   Left footrest: bracket   
14   Left footrest: footrest   
15   Left footrest: rubber protector.   
16   Right footrest: bracket   
17   Right footrest: footrest   
18   Right footrest: rubber protector.   
19   Passenger footrest bracket (left)   
20   Passenger footrest bracket (right)   
21   Tail light number plate holder (CB750F1)   
22   Tail light number plate holder (CB750F2)   
23   Main stand   
24   Side stand   
25   Handle bar clamp Alloy.   
26   Handle bar clamp Alloy.   
27   Battery holder   

Grewth:
Many thanks for all the replies.
You've given me a pretty good idea of what I can expect to pay.
Now I've got to get around to the very time consuming task of preparing everything for coating.
I don't mean the blasting and paint/rust stripping.
Before even that can start, I've got to fix up all the dents and damage caused by fifty years of misuse.
I'm regularly buying up bits of bike that have been powder coated with dents and splits etc still in them.
Never occurred to the would be restorer to get the damage repaired first.

Navigation

[0] Message Index

[*] Previous page