SOHC.co.uk Forums > CB350/400

Float Heights (again!)

(1/3) > >>

XS850:
Hi All, can someone supply the relevant photos from Nurse Julie’s float height set up please, they’re not appearing when I go to the relevant tips & tricks post!

Also - has anyone ever measured the fuel quantity of a correctly set up float height? I’m getting 40ml on each carb - does that sound about right for CB400F float height setting?

Many thanks - Bruce

Nurse Julie:
[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

McCabe-Thiele (Ted):
I found these two links handy for setting the 21 mm float height, its quite a way down on the Vintage Bike builder, likewise it links you to the second site that wil show the 400 float type.


www.vintagebikebuilder.com/cb350-400f-carb-rebuild-demonstration.html

www.vintagebikebuilder.com/setting-mikuni-float-levels.html


I bought an inexpensive poor quality float gauge, I ened up using rubber bands to hold the setting in place. Mine was about £6 the one below looks a tad better

www.ebay.co.uk/itm/205068441561

Athame57:
I use a gauge like this to set float heights myself.  ;)

exvalvesetdabbler:
Use. A Vernier caliper with depth gauge if nothing else.

Navigation

[0] Message Index

[#] Next page