SOHC.co.uk Forums > SOHC Singles & Twins

Honda CB 250 RS Clutch issue dragging I think

<< < (3/3)

CMXCol:
Update

Yes it was the gearbox clutch works fine now gears change snoothly engine revs stay constant when clutch is pulled in same clutch no modifications to that.
Rode it around the block first ride.
Balance chain was in good condition the bike had only done 14000 when I got it but it a bit rusty and tatty 600 quid so to be expected.
It needed a rebore though as the barrel had rusted a bit I think it had been lying around for a while in a shed.
Now it's just getting the riding position better I think I need to move the rearset footpegs forward a bit will need to make some new plates for mounting them but ally flat bar is reasonably cheap 100mm wide.
Also need to decrease the angle on the clip ons a little so they're a bit straighter but all the engine issues are sorted.
Enclosed picture of the nearly finished project.
Thanks for your help!

Navigation

[0] Message Index

[*] Previous page