SOHC.co.uk Forums > CB500/550
Float bowl drain screws
Bloggs:
Just check my drawing. The threads are M6 Fine, screw has a 12mm diameter head, total length 11mm.
exvalvesetdabbler:
[ Guests cannot view attachments ]
Will these do? found on Aliexpress
Dave
DomP:
Ive been trying to find m6 x 0.75 barbed brass hose tails to use to check fuel levels but they seem to all be m6 x 1mm
JezzaPeach:
Seabeowner, is the height measure screw/tube available somewhere? I did try to make one but not well. I also found that despite very careful measuring (the 22mm) my floats were too high and sucking in excess fuel, ‘soggy’ when blipping down also when idling causing stalling. I lowered them slightly and now she’s running better than ever.
Seabeowner:
Jezza, I got mine from my BIL that he bought for his Z650. Can't find any listed anywhere exactly like it but found these on the bay that may do if you can get them sealed with an O ring.
https://www.ebay.co.uk/itm/353959718217
No just looked again the only do M6 x 1.0 so no go. Keep looking.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version