SOHC.co.uk Forums > CB350/400

Cb400/4 No power to points

(1/2) > >>

Coppertop1234:
Hi all been away for a while from the forum
wow last post was 2018 time flies
but the biking bug never dies.
Just playing with a 400/4 and no power to points

Powers up and turns over fine

Checked wiring connectors all seem ok
Replaced points condenser - same issue
kill switch seems ok
possible zenner diode fault?

advice appreciated

Oddjob:
Power to coils on the black/white wire?

Coppertop1234:
will check them out tomorrow cheers

Coppertop1234:
No power to coils
New battery fitted
??

McCabe-Thiele (Ted):
I would start by checking the voltage from the ignition switch and work my way using the wiring diagram following the ignition feed  wire all the way to the coils.

Navigation

[0] Message Index

[#] Next page