SOHC.co.uk Forums > CB750

Recutting valve seats

(1/5) > >>

clinto:

This is what I'm working with.Has cleaned up a fair bit but I need to recut 6 of the valve faces.
Has anyone had experiance with useing amazon-ebay cutters?Those Yankee carbide cutters look the bis but very expesive  for 6 cuts.

clinto:
sorry folks,cannot upload pics with flickr

Bryanj:
Honda valve seats are not suposed to be cut but ground with special kit.
Valves should never be refaced but only replaced

clinto:
[imghttp://20251130_125752 by john clinton, on Flickr][/img]

clinto:
Got there at last,The seats are pitted a bit and grinding  does not clear them.requires a recut of the 3 angles

Navigation

[0] Message Index

[#] Next page