SOHC.co.uk Forums > CB500/550

Not the best job!

<< < (2/2)

TrickyMicky:
My last real bodge was 4miles from home, so, a 1 hour walk pushing it, or an 8 minute very careful ride. This was on the 400, and the main fuse had cried enough and I had no spare.  Even though all myn thoughts were scre aming "Don't do this", I found that the small screwdriver bits that we all use nowadays fit the fuseholders perfectly, and yes, this was after I had identified the cause!!!

McCabe-Thiele (Ted):

--- Quote from: TrickyMicky on February 28, 2026, 03:00:18 PM ---My last real bodge was 4miles from home, so, a 1 hour walk pushing it, or an 8 minute very careful ride. This was on the 400, and the main fuse had cried enough and I had no spare.  Even though all myn thoughts were scre aming "Don't do this", I found that the small screwdriver bits that we all use nowadays fit the fuseholders perfectly, and yes, this was after I had identified the cause!!!

--- End quote ---

The screwdriver bit would take some current to blow.  ;D
The loom would burn out first.

Johnny4428:
That nearly outdoes the 6” nail Micky! Like the nappy pin fix Ted.

Navigation

[0] Message Index

[*] Previous page