SOHC.co.uk Forums > CB500/550
Cb550 F2 Horn Mounting
Nurse Julie:
On this photo, you can see where the bracket is welded to the frame, the bracket on this one has snapped off and all that's left is the stub. It looks like yours has snapped off where it actually joins the frame.
[ Guests cannot view attachments ]
McCabe-Thiele (Ted):
This photo shows the bracket as seen from the right side of the frame, to the left of the lower steering shaft bearing.
IIRC the lug is only welded on the right side of the frame (consistent with your frame that shows the welded up lug point), the integrated bracket provides the second mounting hole to the right side.
The Chassis plate on my frame is clearly not an original fitting btw.
#Tool in place by Macabe Thiele, on Flickr
bbrian66:
Thank you both! This is hugely helpful. Im glad I liked into this before going much further!
Navigation
[0] Message Index
[*] Previous page
Go to full version