SOHC.co.uk Forums > CB350/400

Front Brake Disc - Torque Settings for Bolts

(1/6) > >>

element137:
Hi everyone , I have had a look at the Haynes manual, but cant see the torque values for the four bolts/nuts that pass through the  front wheel hub and front brake discs, also assume these are thread locked  - as standard , there is no retaining tab washers ? ( as per the rear sprocket nuts )

McCabe-Thiele (Ted):
Might be worth checking the downloadable Honda workshop manual on this site.

My 400 has lock washers, a paired arrangement iirc.

exvalvesetdabbler:
Try this,

[ Guests cannot view attachments ]

Regards
Dave

element137:

--- Quote from: McCabe-Thiele (Ted) on April 21, 2026, 08:46:39 AM ---Might be worth checking the downloadable Honda workshop manual on this site.

My 400 has lock washers, a paired arrangement iirc.

--- End quote ---

Thanks - I could not find it in the workshop manual - and I have seen conflicted images reference the lock tab washers - some with - some without ?- not sure if it changed on model years ?

element137:

--- Quote from: exvalvesetdabbler on April 21, 2026, 09:40:48 AM ---Try this,

(Attachment Link)

Regards
Dave

--- End quote ---
Got it - many thanks for that -

Navigation

[0] Message Index

[#] Next page