SOHC.co.uk Forums > CB750

Front master cylinder bleed port ?

<< < (2/2)

Oddjob:
How about a really small interdental brush? I’ve used them very successfully on jets.

Grewth:
Many thanks for all the advice.
I'm thinking about the wire from a wire brush to start with.
The cylinder is totally stripped down,  I was lucky enough to find a pair of circlip pliers that were long enough and thin enough to work.

Bryanj:
Put a small torch into the reservoir and see if light comes through to holes

ozzybud:
Get a set of guitar strings..  Great tiny strong wire.

Navigation

[0] Message Index

[*] Previous page