SOHC.co.uk Forums > CB350/400

Rear brake return spring

(1/2) > >>

Athame57:
Does anyone know of any images or diagrams to show how to fit the return spring at the pedal? I've only just discovered this bit is missing  ;D and now bought one, but it looks like it may be difficult.  ::)

McCabe-Thiele (Ted):
If I remember correctly you need to remove the whole brake lever pivot & shaft to fit the spring as it sits on the inside of the frame.
Others will advise if you can access it without removing the rear swing arm.

exvalvesetdabbler:
[ Guests cannot view attachments ]

You might have to remove the swing arm to release the shaft

Regards
Dave

Bryanj:
I think you have to remove swing arm to get the pivot shaft out, at very lesst remove wheel and shocks to get extreme movement of arm to get room for pivot shaft to come out

Athame57:
Thanks for this guys. As it's come to this I've booked my bike into a local workshop who are rather good. Too blooming hot for that much effort without my own garage!  :o

Navigation

[0] Message Index

[#] Next page