SOHC.co.uk Forums > CB350/400

OOps, always worrying!

<< < (4/6) > >>

Oddjob:
The regulator has 2 bolts holding it onto the plate, both are M6 x 16mm. Measure the bolt and that will mean we can tell you exactly where it's come from.

McCabe-Thiele (Ted):
I'm pretty sure my regulator has two bolts securing it.
One at the top, one at the bottom.

exvalvesetdabbler:
Just add the bolt to your jam jar of other surplus fasteners.  One day it will come in handy.

Regards
Dave

Otis:

--- Quote from: Athame57 on August 20, 2026, 03:30:52 PM ---Looking at the size of that washer, could it be one of those bolts that have a rubber cushion beneath, and do you remember how many of those you fitted back?

--- End quote ---
If you go an inch up from number 21 and go right you will see a hooked bracket that holds the regulator. There is no second fixing for the regulator on my bike

Athame57:

--- Quote from: Otis on August 20, 2026, 08:30:04 PM ---
--- Quote from: Athame57 on August 20, 2026, 03:30:52 PM ---Looking at the size of that washer, could it be one of those bolts that have a rubber cushion beneath, and do you remember how many of those you fitted back?

--- End quote ---
If you go an inch up from number 21 and go right you will see a hooked bracket that holds the regulator. There is no second fixing for the regulator on my bike

--- End quote ---
Are you sure you aren't responding to Oddjob?  ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page