Other Stuff > Misc / Open

Superdream Front & Rear axle nuts - prices

(1/4) > >>

McCabe-Thiele (Ted):
The front axle nut on my Superdream is quite badly rounded off, I was thinking of replacing it, a plain flanged, castellated  type.

The rear nut is in good condition p/n 90305-369-000 16mm £3.67 at DS.

The front nut p/n 90305-401-680 14 mm is a hefty £20.06 at DS.

Can't find one any cheaper at the moment.

Johnwebley:
I had to get a castellated nut for my Yamaha rear wheel spindle,

I found some nice quality ones on ebay

Under a tenner

Sent from my SM-A546E using Tapatalk

Oddjob:
What about these Ted?

https://www.ebay.co.uk/itm/156881934248?chn=ps&_ul=GB&norover=1&mkevt=1&mkrid=710-166974-033325-9&mkcid=2&mkscid=101&itemid=156881934248&targetid=2275367127251&device=c&mktype=pla&googleloc=9046645&poi=&campaignid=23200705092&mkgroupid=188378432552&rlsatarget=pla-2275367127251&abcId=10496860&merchantid=115236135&geoid=9046645&gad_source=1&gad_campaignid=23200705092&gbraid=0AAAAAD_Lr1dW6Dyw0wC30PNNpNOI6tG0p&gclid=CjwKCAjwwrPVBhA1EiwAv_YO-cz-tBd50ClyuZrDqvFkohtuNrApI6FcmYURzhKVr7-a3Opr3knwtBoCXW0QAvD_BwE

McCabe-Thiele (Ted):
Too short in overall height Ken, as it has no plain flanged section.

I have a castled SS nut from Mega Packs in my stock without the flange that looks similar. It sits too close to the fork leg rendering the split pin out of range. Not keen on adding  extra washers even if I could get the right o/d & thickness.

I've found a used complete front axle with nut & washers for £17.95, the nut looks good in the photos, waiting for a reply from the seller about the condition of the hex section.

Skoti:
If the thread pitch is 1.5, then ebay have then listed.

 eBay item number:114364359503

https://www.ebay.com/itm/114364359503

Navigation

[0] Message Index

[#] Next page