SOHC.co.uk Forums > CB750
Cam cover oil leak
mo goldie:
hi
went into the workshop today and used the screw to get the old oil seal out along with a bit of heat and yes all good as
it came out and new one fitted so thanks guy`s I am getting there .... mind you got till next year to finish it as for our weather as only a fair weather rider now lol Age ha ;D
mo goldie:
well it was workshop day. And got the gasket on so hope that do Not leak Now ::)
as if Julie is right then it will be an engine out......but loads of other jobs to do before I can get to start it to find out if its ok.
when I get there I will let you all know who it go`s.
Skoti:
Here's how I managed to remove and refit my CB750 engine myself.
https://photos.app.goo.gl/bT5X3iyGV89S47w26
But you need a smooth concrete garage floor to be able to slide the bike sideways on the main stand.
Good luck
mo goldie:
Hi Skoti
I replaced the the gasket on the cam cover yesterday without taken the engine out and its all on now......... Just hope when I get round to starting it there is No Oil leaks...we shell see but Might take a bit of time as loads to do before I get to that stage ;D
Cheers Maurice
mo goldie:
oh I just need one more bit of heads up............... I have Not seen this one before........... I have what looks like a bolt hole right under the breather top bolt front mounting so in between 2-3 cylinder..... can Not find anything in the manuals I looked at....am I wrong in thinking that it should have a bolt in it............... If so some one has left it out :o :'(
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version