Author Topic: Front brake caliper  (Read 225 times)

Offline stempy

  • Newbie
  • Posts: 26
    • View Profile
Front brake caliper
« on: November 20, 2026, 04:27:02 PM »
Hi all ,
Has anyone fitted a different front brake caliper to improve the braking ?

Cheers

Offline Athame57

  • SOHC Master
  • Posts: 2115
    • View Profile
Re: Front brake caliper
« Reply #1 on: November 20, 2026, 06:43:59 PM »
I've seen conversions to double disc, ( use of CB400N front forks and wheel?  :-\ )  I'm sure that has been discussed on here. After that I only know of improved brake hoses.
« Last Edit: November 20, 2026, 06:48:23 PM by Athame57 »
I brake for animals!
1978 CB400F2 named Elen.

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 8740
    • View Profile
Re: Front brake caliper
« Reply #2 on: November 20, 2026, 06:52:00 PM »
There is a link in Aladdin's s Cave for the twin disc conversion.
Honda CB400NA Superdream (current money puddle)
Honda CB500 K1 (second money pit)
https://www.sohc.co.uk/index.php/topic,28541.0.html
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html
This is a neat 500 restoration in the USA.
http://forums.sohc4.net/index.php/topic,151576.msg1731556.html#msg1731556

Offline Bryanj

  • Grogu
  • *
  • Posts: 12636
    • View Profile
Re: Front brake caliper
« Reply #3 on: November 20, 2026, 07:50:20 PM »
Ted, that only works on 500/550. The 359/ 400 does not have the mountings

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 8740
    • View Profile
Re: Front brake caliper
« Reply #4 on: November 20, 2026, 10:33:15 PM »
My bad, I thought I had seen a 400 here with twin discs?
I assumed this was the download.
Honda CB400NA Superdream (current money puddle)
Honda CB500 K1 (second money pit)
https://www.sohc.co.uk/index.php/topic,28541.0.html
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html
This is a neat 500 restoration in the USA.
http://forums.sohc4.net/index.php/topic,151576.msg1731556.html#msg1731556

Offline scottly

  • Newbie
  • Posts: 33
    • View Profile
Re: Front brake caliper
« Reply #5 on: Today at 03:03:47 AM »
The simplest upgrade is to use a smaller 12mm master cylinder in place of the stock 14mm MC. This will increase the hydraulic "leverage", allowing more line pressure with the same pressure on the hand lever, with more lever travel. The 500/550 and 750 calipers with the same mountings need to be matched with the same diameter rotors, 275mm and 295mm respectively, and neither will bolt directly to the 400F hub.
If you are willing to switch to the 400 twin fork legs, it opens up the caliper options immensely. The two piston Honda calipers used from '82 up work quite well, with the 32mm version being the equivalent of a single 45.25mm piston. I'm using one with a stock 750 14mm MC, along with a 320mm Ducati rotor on my 750 Seeley, and it's as good or better than twin discs. ;D
https://forums.sohc4.net/index.php/topic,178947.msg2340655.html#new   
Seeley SH7-521 owned since 1979

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 8740
    • View Profile
Re: Front brake caliper
« Reply #6 on: Today at 09:25:24 AM »
I fitted the DS master cylinder, with different pads I've found the 400 single disc set up acceptable.

Period braking for an old bike, it was a shock at first compared to my previous  XJ 900 brakes.
Honda CB400NA Superdream (current money puddle)
Honda CB500 K1 (second money pit)
https://www.sohc.co.uk/index.php/topic,28541.0.html
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html
This is a neat 500 restoration in the USA.
http://forums.sohc4.net/index.php/topic,151576.msg1731556.html#msg1731556

Offline Mikep328

  • SOHC Pro
  • Posts: 542
    • View Profile
Re: Front brake caliper
« Reply #7 on: Today at 12:59:49 PM »

When I bought my '76 400F the front brake was terrible - rear brake had more stopping power than the front!  I went through the front brake, replacing piston, seals with genuine Honda parts, replacing the old brake lines with new ones, and cleaning/lubing/adjusting all the moving parts on the caliper mount and de-glazing the rotor.  I then tried 5 different brake pad types, bedding them in properly.  I found that a set of Vesrah (sp?) pads worked the best and now the front brake is quite good. 

IMO, the biggest factor for good brakes on these bike is proper bedding-in of the pads.  This is a rather lengthy process and was suggested to me on this site several years ago.  It is not really necessary for modern brakes since they are much more powerful and can get away with not really bedding in the pads.  But on these bikes it makes a big difference -my 400F's front brake can lock the wheel.  Perform all the steps in this article: https://bikespart.com/how-to-bed-in-motorcycle-brakes/
Mine:
1976 CB400F
1973 Norton 850 Commando
2015 BMW R9T
2017 BMW R1200RS
2021 Moto Guzzi V7 Special
Wife's:
2015 Ducati Diavel
2019 Honda Africa Twin
2019 Honda NCT750

Offline McCabe-Thiele (Ted)

  • Grogu
  • *
  • Posts: 8740
    • View Profile
Re: Front brake caliper
« Reply #8 on: Today at 02:34:09 PM »
There was a time when tyre retailers used to advise running in new tyres on vehicles, lowering top speed to 50mph max.

Back in the day "Running in" stickers displayed on rear car windows of new cars.
Honda CB400NA Superdream (current money puddle)
Honda CB500 K1 (second money pit)
https://www.sohc.co.uk/index.php/topic,28541.0.html
Honda CB400 four super sport (first money pit)
Link to my full restoration http://www.sohc.co.uk/index.php/topic,23291.0.html
This is a neat 500 restoration in the USA.
http://forums.sohc4.net/index.php/topic,151576.msg1731556.html#msg1731556

Offline Orcade-Ian

  • SOHC Master
  • Posts: 1375
    • View Profile
    • Older Vehicle Web
Re: Front brake caliper
« Reply #9 on: Today at 05:51:31 PM »
I remember those stickers Ted:

RUNNING IN - PLEASE PASS

Some wag had some made saying RUNNING OUT - PLEASE PUSH

Ian
1953 BSA Golden Flash 650 - still a basket case
1960 Norton Model 50 Featherbed 350
1960 Ducati Elite 200 (nearing completion)
1972 Honda CB 350/4
1975 Honda CB 550/4 F1
1976 Honda CB 400/4 F1
2020 Honda C125 Super Cub
2026 Honda ADV 350

Offline Athame57

  • SOHC Master
  • Posts: 2115
    • View Profile
Re: Front brake caliper
« Reply #10 on: Today at 08:10:11 PM »

Some wag had some made saying RUNNING OUT - PLEASE PUSH


Was that recently in Russia?  ;D
I brake for animals!
1978 CB400F2 named Elen.