Other Stuff > Tricks & Tips
Candy Gold Custom Tank paint + Piccies..
K2-K6:
Aaaah see what you mean kasey, don't think I'm quite that bad yet so maybe could paint after all.
You don't work as a patience therapist do you!!!
Seamus:
Hi Kacey, Looks like a lot of us share the same tolerances. Must be our age. Still need to find the skill for the painting though, mine always turns out badly. probably as I don't have the correct equipment, but it may happen at some time in the future.
May have a go on something that does not matter.
Cheers
Seamus
kaceyk2:
There are many good cheapish compressors on the market, this is a good thing to start off with, Idealy you want something that can keep an output of 30-50 lbs psi being delivered.. You want to buy the biggest compressor that you can afford...in other words the one with the biggest holding tank...
Drain it of water every time before you start, when youve finished, and inbetween coats of paint, idealy though you want an inline water trap.... cast aside any coiled plastic pipe that may have come with it, and get proper reinforced rubber hosing... a devilbiss gun can be got on ebay reasonable...
Then if you havent got any sheets of metal lying around...go to your local auto-paint refinishing suppliers, they usually have a skip for folk to put waste products in, these often contain bent wings and panels, which usually they will let you take and are good for practising on, but also they are good for checking your gun and fan width/ gun pressure etc when the gun has been loaded with paint...yes you can use the garage wall, but metal is better!
AshimotoK0:
Hi Kacey,
I paid top money to have my 750K0 tank etc. painted by Andrew Parnaby but I have two CB250K0 tanks and fork ears to paint, one in candy red and the other in candy blue (half of the tank is white). These projects don't justify bags of money spent on them so I may have a go myself. I have a large compressor and a really old Devilbiss JGA spray gun. Any advice on settings on a Devilbiss gun. It is the suction not gravity fed type.
Cheers
Ash
kaceyk2:
Ashimoto.....
Thats exactly the same gun I used for my tank.!!!
It's what I was taught with, and wouldnt change it for the world!!
I use mine on approx 30-45;lbs pressure... The other thing I do is have a jar with a tin lid.. like say a "pataks" curry jar or a honey jar...anything that has a tin lid...
make a hole in the tin lid just a little bigger than the suction tube on the devillbiss, and mix your paint in the jar....slip the jar in your paint pot, feed the suction pipe from the devillbiss in and lock down the pot.
This saves loads of money in paint..Especially on two pack paints that cannot be saved once mixed..
And gives the added bonus that when you done, you just unlock your gun, stick the suction tube in a jar of thinners, blow through, wipe the tin lid, swill the jar out and your done.
HOWEVER... ( jeez I hate "howevers" but this one is important!)
I did the base colours of my tank with paint that had been bought before they changed the laws on one pack paints....................
Then used two packs on top.
I believe it is now illegal for places to sell 1k paints, and all base coats have to be water based......(YUK)
I also believe, that to spray water based base coats with our trusty old cherished and loved devillbisses
We may need to change the Nozzle............
Parts are easilly available for our devillbisses, including smaller and larger nozzle set ups.......
But, I dont seem to be able to get a definative answer as to exactly what nozzle size we need for these water based products....
I shall do more searches and let you know what I find out , as I will need to know anyways!!
Worse may yet be to come.....
There is a German outfit, that claim to have mastered "water based primers" ?????????
I hear you all screaming "what on BARE metal?" ( damn germans, why cant they let things be, instead of trying to organise and clean everything?)
If that is whats in the pipeline, then stock up on primer now!!!!
This is a subject thats close to my heart as you may have guessed..... Look at the colours of all the new cars.... they are so DULL, thats what water based has done.
Have you got your paint?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version