SOHC.co.uk Forums > CB350/400

What length Brake Hose

<< < (2/2)

neilma:
Thanks for the photo 470Four! I hadnt thought  ::) to try a banjo bolt in there :) On previous pictures I had seen it looked like the end of the hose had a threaded end which wound straight into the caliper which meant you could do away with the banjo fitting (and bolt) and just wind the hose straight into the caliper.

Anyway, thanks for your help guys - shall get on the phone to Hel tomorrow and get some hose ordered up!

Cheers
Neil

neilma:
Just to close this down - I purchased a 31 Inch length hose, with a Straight Banjo at one end (probably with hindsight would have got a 20 degree bent one, but the straight works ok). At the other end, I specified a M1.25 Concave fitting. This then bolts straight into the caliper.

Navigation

[0] Message Index

[*] Previous page