SOHC.co.uk Forums > CB750

wiring loom

(1/2) > >>

cobra:
Hi now i am building my CR750 lookalike, i have decided to remove the alternater, lights,warning lamps,winker relay,fuse box,indicators horn etc, the problem is,i would like to make a new wiring loom,does anyone have a wiring diagram, or know how to do it, i know i will want a on/off switch, starter button (as i intend to keep the electric start) with not having the alternator i wont need the regulator or rectifier,  will i ? i will also need a main fuse somwhere in the system, if you know how to do it, can you scrible it on the back of a fag packet and post it up here, thanks.Tony.

K2-K6:
Basics you'd need are:-

Switched supply to coils to turn it on and off, earth to frame, positive lead to starter solonoid/to starter motor, switched line to the solonoid to activate it and turn motor over.

Anyone add anything else?

Oil pressure switch circuit?

Bryanj:
You will have to leave the alternator rotor on if you want electric start and if you use the electric start with no alternator the battery won't last long

cobra:
could i use a seperate car battery to fire the motor up?. i am only going to use the bike for parade laps. and i will be using a oil presure gauge instead of a warning light.

cobra:
or if i leave the kickstart inplace i could use that.

Navigation

[0] Message Index

[#] Next page