SOHC.co.uk Forums > CB500/550

Charging problem

(1/2) > >>

Paull:
Hi All
I have an f2 the alternator coils show 1.2 ohms across the three yellow phase leads, it said 0.39 ohms in the Haynes. the other coil is fine 4.9 ohms as per the book.
I have 2 alternators and there the same as above.
The regulator is old and pitted on the top contact, can i just file it flat, it shows 0.5ish ohms between black and green lead.
How do i a just the voltage out of the reg.
New rect, so hope no probs with that.
Thanks for any help
Paul

Bryanj:
The adjustment procedure is in the genuine honda manual

Paull:
Thanks Bryanj,

Paull:
Bryanj
Just downloaded the workshop Manuel makes the Haynes look like a comic.
It is still saying 0.35 ohms +-10% if under this unit it is defective, so I assume over is OK.
Will set up regulator as per the book and go from there.
Thanks
Paul

Bryanj:
The accuracy of most multimeters under

Navigation

[0] Message Index

[#] Next page