SOHC.co.uk Forums > CB750

Rear suspension lower bush

(1/1)

pje750:
Hi, have just had my frame and swinging arm re-sprayed and decided to fit new bushes in the swing arm for the rear suspension units. But the new replacements seem to be too large to go in - have made sure the holes in the swing arm are clean, and the bushes are the right part number. But they still won't go in - do they need heat or pressing in? Any help/advice appreciated. Cheers. Pete

Bryanj:
They are a very tight press fit but do make sure you got the outer steel sleeve from th eold one out

Seamus:
I used stud bar and some washers that I had turned up to match the size of the bush. As Bryan said, they are pretty tight,but will pull in nicely.

pje750:
Thanks - you were right. It appears that the outer part of the old bush had seized and hadn't been removed. Difficult to spot, so thanks for the tip. Cheers. Pete

Navigation

[0] Message Index