SOHC.co.uk Forums > CB750

next project

(1/3) > >>

david451:
Nearly finished my K4 and although have been split about how to do my next one a 76k, the price of exhausts is over 1k and it just aint worth it.

My other choice was to cafe it but went off that idea as well and made up my mind to do a decent cr750 replica, something with no lights, and racing exhausts, something for the nicer days. Being a 76 allows me to do most of the things you cant do on a more modern bike because of the legislation.

Anyway can't tear her down just yet until I do the dry build and mark up all the bits to come off and weld on bits.

Does anybody know where I can get parts for this at a sensible price, and since I want twin discs with my standard wheel does anybody know how to go about this. The proper brakes are over 1k each and I doubt my pockets are deep enough.

I don't mind purchasing the alloy fuel tank, seat etc, but was thinking I could make the oil tank myself using the fitments from mine. Is there a ruling on how much oil you can put in this tank before you risk flooding the engine, or any other parameters I need to take into consideration. I made a log burner/boiler, pressure tested it and it was fine so I guess that making a tank is simple enough. A drawing would be nice, with dimensions if anybody has one. Might even chop up my fuel tank, don't know yet.

Bryanj:
Twin disc is relatively easy you just need to assemble the parts

(1) Disc
(2) caliper and mounting from same bike(this might be a problem as i believe the 76 was an odball)
(3) longer bolts
(4) modified speedo drive (If its going on the road)
(5) GL 1000 master cyl

SteveD CB500K0:
Here's a useful intro to dual discs:

http://www.sohc4.net/?p=52

david451:

--- Quote from: SteveD CB500F on December 06, 2011, 08:58:39 AM ---Here's a useful intro to dual discs:

http://www.sohc4.net/?p=52



--- End quote ---

Thanks for that guys.

Fokin wife done the sweeping up yesterday and swept up bits of my front wheel the bitch, just found out "after" the bin man has gone. Took me ages to find replacements. Probably deliberate, she's in the huff tonight because I'm working on it again, so going to move all my stuff out into my garage before she gets a chance to nick anything.

Bryanj:
Steve that link is good EXCEPT for the fact he has not removed the error about the 500 speedo drive working despite several comments GRRRRR!

Navigation

[0] Message Index

[#] Next page