SOHC.co.uk Forums > CB750
Indicators
BigAl (Alan):
Hi David,
If there are 2 wires for each indicator,front only (RHS colour code light blue&light blue white strip) (LHS colour code orange&orange with white strip) green cable is the earth. As Bryan mentioned the indicator lamps will have a dual element. One element that stayed on 'position' the other element for flashing/indication, American market model. I think you have a K3 model, the wiring diagram is in the Clymer workshop manual but not in the Haynes manual
Alan
PS I think you will need to disconnect the 'position' circuit for the UK
david451:
--- Quote from: BigAl on December 15, 2011, 08:55:38 AM ---Hi David,
If there are 2 wires for each indicator,front only (RHS colour code light blue&light blue white strip) (LHS colour code orange&orange with white strip) green cable is the earth. As Bryan mentioned the indicator lamps will have a dual element. One element that stayed on 'position' the other element for flashing/indication, American market model. I think you have a K3 model, the wiring diagram is in the Clymer workshop manual but not in the Haynes manual
Alan
PS I think you will need to disconnect the 'position' circuit for the UK
--- End quote ---
Thanks bigal, playing about trying to post pics at the minute with the thread I got. I guess what you mean is just use one of the wires then the indicator one.
david451:
--- Quote from: SteveD CB500F on December 14, 2011, 04:28:09 PM ---
--- Quote from: david451 on December 14, 2011, 01:22:17 PM ---
Cant get a picture to load its too large, went onto photobucket as somebody mentioned to me but I dont have a clue what you are meant to do, spent two hours and no further forward.
--- End quote ---
I wrote a FAQ on this for SOHC4.net: http://forums.sohc4.net/index.php?topic=14605.msg93296#msg93296
Some of the limits are different but it's basically the same.
Steve
--- End quote ---
First go at sending a photo so hope it worked
david451:
--- Quote from: BigAl on December 15, 2011, 08:55:38 AM ---Hi David,
If there are 2 wires for each indicator,front only (RHS colour code light blue&light blue white strip) (LHS colour code orange&orange with white strip) green cable is the earth. As Bryan mentioned the indicator lamps will have a dual element. One element that stayed on 'position' the other element for flashing/indication, American market model. I think you have a K3 model, the wiring diagram is in the Clymer workshop manual but not in the Haynes manual
Alan
PS I think you will need to disconnect the 'position' circuit for the UK
--- End quote ---
david451:
--- Quote from: BigAl on December 15, 2011, 08:55:38 AM ---Hi David,
If there are 2 wires for each indicator,front only (RHS colour code light blue&light blue white strip) (LHS colour code orange&orange with white strip) green cable is the earth. As Bryan mentioned the indicator lamps will have a dual element. One element that stayed on 'position' the other element for flashing/indication, American market model. I think you have a K3 model, the wiring diagram is in the Clymer workshop manual but not in the Haynes manual
Alan
PS I think you will need to disconnect the 'position' circuit for the UK
--- End quote ---
Waiting on the decals for the tank and then its getting painted the orange it should be.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version