SOHC.co.uk Forums > CB500/550
500 K cafe racer conversion - build thread
Ewan 500 K1:
--- Quote from: Ewan 500 K on March 04, 2012, 08:52:59 PM ---
--- Quote from: MIKE550/4 on March 04, 2012, 05:17:24 PM ---as far as i can see this is part no for my plate 41211-323-000
if you go to http://www.motogrid.com and search buy it ... it only comes up with 500 and 550
although this guy is selling this, slight diffference with the spline shaft ?
http://www.ebay.co.uk/itm/Honda-CB750-1970-K0-SOHC-Rear-Brake-Plate-/330639712147?pt=UK_Motorcycle_Parts&hash=item4cfba99f93
sure one of other guys will confirm
--- End quote ---
Mike, the part number you mention is the cover plate for the rear sprocket, not the the rear brake plate :P
The difference between the 750K0 one one ebay and your (and my) K3 one is that the 750K0 one seems to be missing the wee wear indicator stub above the spline. .... possibly this was just a wee addition and otherwise both the brake plate on your K3 and the K0 are the same ?
--- End quote ---
Had a gander at that site (which is very useful :) ) .... the brake plate fits all of the follwoing:
CB550F A (77) MOTORCYCLE, JPN, VIN# CB550F-2100001 TO CB550F-2114871
CB550K A (77) MOTORCYCLE, JPN, VIN# CB550K-2000007 TO CB550K-2015308
CB550K A (78) MOTORCYCLE, JPN, VIN# CB550K-2100001 TO CB550K-2122082
CB750A A (77) MOTORCYCLE, JPN, VIN# CB750A-7100001 TO CB750A-7110560
CB750K A (77) MOTORCYCLE, JPN, VIN# CB750-2700009 TO CB750-2729534
CB750K A (78) MOTORCYCLE, JPN, VIN# CB750-2800001
part number is : 43100-393-781
MIKE550/4:
bryan j has mentioned this site
matthewmosse:
Be carefull of using stainless for high stress or mission critiacl areas like brakes, it's not nessisarily that strong and I'd be after high tensile steel or getting bolts from someone who sells parts specifically for this job. Mot stainless is A2 grade and not up to the job for disk holding. Phill Denton engineering are the only firm I can think of who I'd go to for shiny bolts for this job. That said I don't do shiny
Ewan 500 K1:
--- Quote from: matthewmosse on March 07, 2012, 06:22:11 PM ---Be carefull of using stainless for high stress or mission critiacl areas like brakes, it's not nessisarily that strong and I'd be after high tensile steel or getting bolts from someone who sells parts specifically for this job. Mot stainless is A2 grade and not up to the job for disk holding. Phill Denton engineering are the only firm I can think of who I'd go to for shiny bolts for this job. That said I don't do shiny
--- End quote ---
cheers for the heads up on that one ... I had it the the back of my mind that normal stainless bolts werent the ones for the job. Tried Phil D a while ago I think , but they dont have the neccsary bolt sizes as stock, would need to do a one off. Anyway, got a hold off 6 GL1000 disc bolts (112mm long) from DSS the other day... well pricey at £22 inc vat and delivery. Hoping they'll do the job. I was going to order new nuts to fit as well, but fell over at the price of those --- £3.25 each +VAT & delivery
Ewan 500 K1:
--- Quote from: Ewan 500 K on March 07, 2012, 06:43:15 PM ---
--- Quote from: matthewmosse on March 07, 2012, 06:22:11 PM ---Be carefull of using stainless for high stress or mission critiacl areas like brakes, it's not nessisarily that strong and I'd be after high tensile steel or getting bolts from someone who sells parts specifically for this job. Mot stainless is A2 grade and not up to the job for disk holding. Phill Denton engineering are the only firm I can think of who I'd go to for shiny bolts for this job. That said I don't do shiny
--- End quote ---
cheers for the heads up on that one ... I had it the the back of my mind that normal stainless bolts werent the ones for the job. Tried Phil D a while ago I think , but they dont have the neccsary bolt sizes as stock, would need to do a one off. Anyway, got a hold off 6 GL1000 disc bolts (112mm long) from DSS the other day... well pricey at £22 inc vat and delivery. Hoping they'll do the job. I was going to order new nuts to fit as well, but fell over at the price of those --- £3.25 each +VAT & delivery
--- End quote ---
just opened my DSS parcel, they only had 4 GL1000 disc bolts in stock.... anyone could a couple (112mm long ), part no. 90122-371-000 ?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version